Insertion Paddle Wheel type Flow Transmitter
Insertion Paddle Wheel type Flow Transmitter
Type of sensor : InsertionPaddel Wheel
Service : Any clearliquids Max. % of Solids : 1% of fluid volume, non-abrasive, non-magnetic, micron in dia.& length Mounted : Field
Pressure drop : Less than 0.1 bar
Accuracy : +/- 1% of Full Scale if velocity is more than 0.5 m/s
Repeatability : +/- 0.5%
Enclosure : IP 65 or, Flameproof
Fitting material : ABS, SS304 or, SS316
Fitting Type : T type Welded Flanged ends
Sensor Cable Length : 0.5 meters signal transmission cable
Output Cable Length : Two core shielded wire - One Meter
Paddle : PVDF
Indicator Housing : Polycarbonate
O-rings : Viton
Sensor Rod : PP or, SS 316
Display : 8 X 2 alpha-numeric (Backlit) 7 digits for Total & 4 digits for rate
Unit for indication : LPM, LPH, M3/Hr, USGPM
Out Put : 4 to 20 mA
Supply : 230 V AC +/- 15%, 50 Hz
T Fitting : It is compulsary with PP or, SS Flow Sensors (Selection from TYPE OF T-FITTINGS)
Line Size Selection (Water) : Min. & Max. Flow Rates
NB
|
MINIMUM M3/HR
|
MAXIMUM M3/HR
|
15 |
0.2 |
2.1 |
25 |
0.8 |
8.0 |
40 |
1.9 |
19 |
50 |
3.5 |
35 |
65 |
5.8 |
58 |
80 |
7.5 |
75 |
100 |
14 |
140 |
125: 5" |
22 |
220 |
150: 6" |
32 |
320 |
175: 7" |
45 |
450 |
200: 8" |
56 |
560 |
225: 9" |
71 |
710 |
250: 10" |
88 |
880 |
275: 11" |
106 |
1060 |
300:12" |
126 |
1260 |
325:13" |
148 |
1480 |
350:14" |
172 |
1720 |
375:15" |
197 |
1970 |
400:16" |
224 |
2240 |
425:17" |
253 |
2530 |
450:18" |
284 |
2840 |
175:19" |
316 |
3160 |
500:20" |
350 |
3500 |
-
-
-
Insertion Paddle Wheel type Flow Indicating Transmitter Field Mounted F-383
-
Insertion Paddle Wheel type Flow Indicating Transmitter Panel Mounted P-383
-
Type of T-FITTINGS for Insertion Paddle Wheel type Flow Transmitters